SMC Networks TigerAccess SMC7816M - Manual (Page 484)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
20-24
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered
up.
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot
command. See the table under the dir command for a description of the
file information displayed by this command.
Console#dir
File name File type Startup Size (byte)
------------------------------------- -------------- ------- -----------
Unit1:
SMC7816M_VSW_Diag_V3.2.1.0.bix Boot-Rom Image Y 1556680
SMC7816M_VSW_Opcode_V3.2.2.5.bix Operation Code Y 4250428
Factory_Default_Config.cfg Config File N 455
startup1.cfg Config File Y 2698
---------------------------------------------------------------------------
Total free space: 9043968
Console#
Console#whichboot
File name File type Startup Size (byte)
------------------------------------- -------------- ------- -----------
Unit1:
SMC7816M_VSW_Diag_V3.2.1.0.bix Boot-Rom Image Y 1556680
SMC7816M_VSW_Opcode_V3.2.2.5.bix Operation Code Y 4250428
Factory_Default_Config.cfg Config File N 455
startup1.cfg Config File Y 2698
---------------------------------------------------------------------------
Total free space: 9043968
Console#