SMC Networks TigerAccess SMC7816M - Manual (Page 468)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
20-8
Related Commands
show startup-config (20-3)
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 4-1.
• The POST results should all display “PASS.” If any POST test
indicates “FAIL,” contact your distributor for assistance.
Example
Console#show system
System Description: TigerAccess(TM) SMC7816M/VSW
System OID String: 1.3.6.1.4.1.202.40.2
System information
System Up time: 0 days, 1 hours, 23 minutes, and 44.61 seconds
System Name : [NONE]
System Location : [NONE]
System Contact : [NONE]
MAC Address (Unit1): 00-20-1A-DF-9C-A0
Web Server: Enabled
Web Server Port: 80
Web Secure Server: Enabled
Web Secure Server Port: 443
Telnet Server: Enable
Telnet Server Port: 23
Jumbo Frame: Disabled
POST Result:
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Done All Pass.
Console#