Changing the aging time, Changing the aging time -4, Figure 11-3 address aging -4 – SMC Networks TigerAccess SMC7816M User Manual
Page 300: Command attributes
A
DDRESS
T
ABLE
S
ETTINGS
11-4
CLI – This example also displays the address table entries for port 1.
Changing the Aging Time
You can set the aging time for entries in the dynamic address table.
Command Attributes
• Aging Status – Enables/disables the aging function.
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-1000000 seconds; Default: 300 seconds)
Web – Click Address Table, Address Aging. Specify the new aging time,
click Apply.
Figure 11-3 Address Aging
CLI – This example sets the aging time to 400 seconds.
Console#show mac-address-table interface ethernet 1/1
Interface Mac Address Vlan Type
--------- ----------------- ---- -----------------
Eth 1/ 1 00-E0-29-94-34-DE 1 Permanent
Eth 1/ 1 00-20-9C-23-CD-60 2 Learned
Console#
Console(config)#mac-address-table aging-time 400
Console(config)#