SMC Networks TigerAccess SMC7816M - Manual (Page 860)

C
LASS OF
S
ERVICE
C
OMMANDS
33-18
Example
The following example maps the Traffic Class value of 1 to CoS value 0:
show map ip port
This command shows the IP port priority map.
Syntax
show map ip port [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-19)
• port-channel channel-id (Range: 1-12)
Default Setting
None
Command Mode
Privileged Exec
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Related Commands
map ip port (Global Configuration) (33-12)
map ip port (Interface Configuration) (33-12)
Console(config)#priority ipv6 1 0
Console(config)#
Console#show map ip port
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 5 80 0
Console#