SMC Networks TigerAccess SMC7816M - Manual (Page 566)

U
SER
A
UTHENTICATION
C
OMMANDS
22-26
ip ssh timeout
This command configures the timeout for the SSH server. Use the no
form to restore the default setting.
Syntax
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation.
(Range: 1-120)
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response
from the client during the SSH negotiation phase. Once an SSH session
has been established, the timeout for user input is controlled by the
exec-timeout command for vty sessions.
Example
Related Commands
exec-timeout (20-31)
show ip ssh (22-31)
Console(config)#ip ssh timeout 60
Console(config)#