SMC Networks TigerAccess SMC7816M - Manual (Page 745)

D
ISPLAYING
VDSL I
NFORMATION
29-63
Command Usage
• Use this command without the interface parameter to display the band
plans used for all VDSL ports on the switch, or with an interface to
display the band plan used for a specific port.
• The band plan options provided by this switch are described by ITU-T
Standards G.997 and G.998. The first field in the band plan designator
indicates the ITU standard, the second field indicates the lower
frequency bound, and the third field indicates the upper frequency
bound.
• A list of predefined band plans are shown in Table 29-3, “VDSL2
Band Plans,” on page 29-5.
Example
This example shows that the band plan for Port 1 is based on ITU-T
G.998, the frequency bounds are 64 kHz to 30 MHz, and the data rate is
symmetric.
Related Commands
lre band-plan (29-4)
show lre option-band
This command displays the frequencies to be used for the optional US0
band.
Syntax
show lre option-band [unit/port]
• unit - Stack unit. (Range: 1)
• port - Port number. (Range: 1-16)
Command Mode
Privileged Exec
Console#show lre band-plan 1/1
Bandplan : 998-640-30000 100/100
Console#