SMC Networks TigerAccess SMC7816M - Manual (Page 716)

VDSL C
OMMANDS
29-34
Related Commands
lre datarate (29-26)
show lre rate-adaption (29-75)
lre apply
This command applies all global VDSL settings to each VDSL port on the
switch or to a specified port, overwriting any previous settings configured
for specific interfaces. Use the no form to restore the default setting.
Command Mode
Global Configuration
Interface Configuration (VDSL Port)
Command Usage
• Enter this command in global configuration mode to apply all
configured global VDSL settings to all VDSL ports, or in interface
mode to apply all settings for a specific VDSL port.
• Global configuration settings made with the lre commands are not
applied to any interface until this command is entered.
Example
The following applies all global VDSL settings to Port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#lre apply
Console(config-if)#