SMC Networks TigerAccess SMC7816M - Manual (Page 815)

E
DITING
VLAN G
ROUPS
32-7
Editing VLAN Groups
vlan database
This command enters VLAN database mode. All commands in this mode
will take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete
VLANs. After finishing configuration changes, you can display the
VLAN settings by entering the show vlan command.
• Use the interface vlan command mode to define the port
membership mode and add or remove ports from a VLAN. The
results of these commands are written to the running-configuration
file, and you can display this file by entering the show
running-config command.
Example
Related Commands
show vlan (32-16)
Table 32-3 Commands for Editing VLAN Groups
Command Function Mode Page
vlan database Enters VLAN database mode to add,
change, and delete VLANs GC 32-7
vlan Configures a VLAN, including VID,
name and state VC 32-8
Console(config)#vlan database
Console(config-vlan)#