SMC Networks TigerAccess SMC7816M - Manual (Page 925)

DHCP R
ELAY
37-7
address (when DHCP snooping or relay is enabled), and unicast the
packet to the DHCP server.
Default Setting
replace
Command Mode
Global Configuration
Usage Guidelines
• Refer to the Usage Guidelines under the ip dhcp information
option command (page 37-4) for information on when Option 82
information is processed by the switch.
• When the Option 82 policy is set to “keep” the original information
in the request packet, the frame type specified by the ip dhcp
information option command is ignored.
Example
This example sets the Option 82 policy to keep the client information in
the request packet received by the relay agent, and forward this packet on
to the DHCP server.
Related Commands
ip dhcp information option (37-4)
ip dhcp relay server (37-3)
ip dhcp snooping (23-18)
show ip dhcp relay server
This command displays the configuration settings for DHCP relay service.
Command Mode
Privileged Exec
Console(config)#ip dhcp information policy keep
Console(config)#