SMC Networks TigerAccess SMC7816M - Manual (Page 686)

VDSL C
OMMANDS
29-4
lre band-plan
This command sets the frequency bands used for VDSL signals based on a
set of predefined plans. Use the no form to restore the default status.
Syntax
lre band-plan value
no lre band-plan
value – Index for a predefined band plan.
(See Table 29-3, “VDSL2 Band Plans,” on page 29-5.)
Default Setting
5 (100/100)
Command Mode
Interface Configuration (VDSL Port)
Command Usage
• Enter this command in global configuration mode to set a band plan
for a designated usage type for all VDSL ports, or in interface mode to
set a plan for a specific VDSL port.
• The band plan options provided by this command are described by
ITU-T Standards G.9932. The first field in the band plan designator
indicates the ITU standard, the second field indicates the lower
frequency bound, and the third field indicates the upper frequency
bound.
• This switch is specifically designed to support Band Plan 5 – G.993.2,
Annex C for Japan. Careful testing should be carried out before using
any other band plans. The following table lists the predefined band
plans. Note that band plan designators starting with 997 are primarily
for use in the European Union, those starting with 998 are mainly for
use in North America.