SMC Networks TigerAccess SMC7816M - Manual (Page 883)

IGMP Q
UERY
C
OMMANDS
35-7
Command Mode
Privileged Exec
Command Usage
Member types displayed include IGMP or USER, depending on
selected options.
Example
The following shows the multicast entries learned through IGMP
snooping for VLAN 1:
IGMP Query Commands
This section describes commands used to configure Layer 2 IGMP query
on the switch.
Console#show mac-address-table multicast vlan 1 igmp-snooping
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1 224.1.2.3 Eth1/11 IGMP
Console#
Table 35-3 IGMP Query Commands
Command Function Mode Page
ip igmp snooping querier Allows this device to act as the
querier for IGMP snooping
GC 35-8
ip igmp snooping
query-count Configures the query count GC 35-8
ip igmp snooping
query-interval Configures the query interval GC 35-9
ip igmp snooping
query-max-response-time Configures the report delay GC 35-10
ip igmp snooping
router-port-expire-time Configures the query timeout GC 35-11