Show queue bandwidth, Show queue bandwidth -9 – SMC Networks TigerAccess SMC7816M User Manual
Page 851
P
RIORITY
C
OMMANDS
(L
AYER
2)
33-9
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
CoS values assigned at the ingress port are also used at the egress port.
This command sets the CoS priority for all interfaces.
Example
The following example shows how to change the CoS assignments to a
one-to-one mapping:
Related Commands
show queue bandwidth
This command displays the weighted round-robin (WRR) bandwidth
allocation for the eight priority queues.
Default Setting
None
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#queue cos-map 0 0
Console(config-if)#queue cos-map 1 1
Console(config-if)#queue cos-map 2 2
Console(config-if)#exit
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 3 4 5 6 7
Console#