SMC Networks TigerAccess SMC7816M - Manual (Page 765)

D
ISPLAYING
VDSL I
NFORMATION
29-83
Command Usage
Use this command without the interface parameter to show
performance information for all VDSL ports on the switch, or with an
interface to display this information for a specific port. For a
description of the displayed items, refer to the “Alarm Profile
Commands” on page 29-51.
Example
Console#show lre perf 1/1
port 1 performance counters since last reset :
Loss of frame : 0 Loss of signal : 0
Loss of power : 0 Errored seconds : 17
Severely error seconds: 0 Unavaliable seconds : 0
port 1 performance counters in current 15min interval :
Loss of frame : 0 Loss of signal : 0
Loss of power : 0 Errored seconds : 4
Severely error seconds: 0 Unavaliable seconds : 0
port 1 performance counters in current 1day interval :
Loss of frame : 0 Loss of signal : 0
Loss of power : 0 Errored seconds : 13
Severely error seconds: 0 Unavaliable seconds : 0
port 1/14 ETHERNET RECEIVE Performance Counters :
Frames : 2835 Bytes : 3385891280
Pause Frames : 24 Broadcast Frames : 0
Dropped Frames : 0 Alignment Errors : 0
Oversize : 0 Undersize : 0
CRC Errors : 0 Carrier Sense Err : 0
port 1/14 ETHERNET TRANSMIT Performance Counters :
Frames : 3048 Bytes : 3385891280
Pause Frames : 0
port 1/14 H.D.L.C Performance Counters :
CRC Errors : 3385891280 Invalid Frames : 0
Dropped Frames : 0
Console#
Table 29-13 show lre phys-info - display description
Field Description
Performance Counters at Specified Interval
Loss of frame
Number of seconds during which there was loss of framing
Loss of signal Number of seconds during which there was loss of signal