Toshiba HWS-802XWHT6-E User Manual
Page 111
110
Toshiba
4. Auto Curve Setting
FC code setting can make flexible Auto-Curve settings.
<Preparation>
1
Press the TEST
and SET
and SELECT
buttons at the same time for 4 seconds or longer.
(See display
)
(Make sure that no operation is in progress.)
2
Specify an item code (FC) from among 29 to 2F with the
TEMP.
button for temperature setting.
3
Set data with the TIME
button for timer setting.
4
Press the SET
button. (If
lights, the status is
confirmed)
5
Repeat
2
through
4
for each item.
6
Pressing the TEST
button moves the unit to the normal
stop state.
• Auto-Curve temperature shift
Without Auto-Curve individually set, the set temperature can be
shifted in the range of ±5k of the current setting. (The set temperature
is valid only when Auto operation is in progress.)
1
Press the AUTO TEMP
button for 4 seconds or
longer. (See display
)
(The remote controller FC setting screen appears.)
2
Set a temperature shift range with the TEMP.
button for temperature setting. (-5k to 5k)
3
Press the SET
button. (If
lights, the status is
confirmed)
4
Pressing the TEST
button moves the unit to the normal
stop state.
FC
Item
Details
Fist shipment
29
Outside air temperature T1 temperature
-0015: -15°C
-
0000: 0°C
-0010: -10°C
2B
Outside air temperature T3 temperature
0000: 0°C
-
0015: 15°C
0010: 10°C
2C
Set temperature A with outside air temperature of -20°C
0020: 20°C
-
0055: 55°C
0040: 40°C
2D
Set temperature B with outside air temperature of T1
0020: 20°C
-
0055: 55°C
0035: 35°C
2E
Set temperature C with outside air temperature of 0°C
0020: 20°C
-
0055: 55°C
0030: 30°C
2F
Set temperature D with outside air temperature of T3
0020: 20°C
-
0055: 55°C
0025: 25°C
30
Set temperature E with outside air temperature of 20°C
0020: 20°C
-
0055: 55°C
0020: 20°C
31
Zone2 ratio with Zone1 as Auto
0000: 0%
-
0100: 100%
0080: 80%
2
3
6
4
1
E(20)
-20
T1
(-10)
0
T3
(+10)
20
Outside
air temperature (TO)
D(25)
C(30)
B(35)
A(40)
TSC-F
Set temperature ( )
Auto-Curve
Temperature shift
Default Setting
2
4
3
1
+00A09-002_01EN_SVM_ALL_Air_to_Water.book Page 110 Monday, October 5, 2009 2:09 PM