Toshiba HWS-802XWHT6-E - Manual (Page 148)

147
Toshiba
2 Outlet cabinet How to remove
1) Perform the step 1-1.
2) Remove the screws of the outlet cabinet and
parting board.
(ST1T Ш4 Ч 8, 4 screws)
3) Remove the screws of the outlet cabinet and
bottom board.
(Hex Ш4 Ч 10, 2 screws)
4) Remove the screws of the outlet cabinet and
motor base.
(ST1T Ш4 Ч 8, 2 screws)
5) Remove the screws of the outlet cabinet and heat
exchanger.
(ST1T Ш4 Ч 8, 1 screws)
6) Remove the screws of the outlet cabinet and fin
guard.
(Hex Ш4 Ч 10, 2 screws)
3 Side cabinet 1) Perform the step 1-1.
2) Remove the screws that fixes the inverter
assembly and the side cabinet.
(ST1T Ш4 Ч 8, 2 screws)
3) Remove the screws of the side cabinet and valve
fixing board.
(ST1T Ш4 Ч 8, 2 screws)
4) Remove the screws of the side cabinet and piping
panel (back).
(Hex Ш4 Ч 10, 2 screws)
5) Remove the screws of the side cabinet and bottom
board.
(Hex Ш4 Ч 10, 1 screws)
6) Remove the screws of the side cabinet and fin
guard (heat exchanger).
(Hex Ш4 Ч 10, 5 screws)
7) Remove the side cabinet while shifting it upward
(inverter hook).
No.
Exchange parts
name
Work procedure Remarks
Outlet cabinet Heat exchanger
Motor base Paring board
Fin guard
Inverter assembly Side cabinet
Valve fixing board
+00A09-002_01EN_SVM_ALL_Air_to_Water.book Page 147 Monday, October 5, 2009 2:09 PM