Spectra Precision ProMark 800 Reference Manual - Manual (Page 106)

94
Troubleshooting
5 Medium File close error
Receiver failed to close the raw data file. Try again. If still unsuccess-
ful, turn off the receiver and try again.
6 Medium File write error
Receiver failed to write data into the raw data file.If the alarm persists,
close the file and resume data logging.
If error persists and selected storage medium is USB, check that it’s
not in read-only (remove lock). Else, change USB key and try again.
If error persists and selected storage medium is internal memory, re-
format internal memory using command $PASHS,INI,2 (configuration
will be lost).
7 Medium File read error
Receiver failed to read the number of files in the selected storage
medium.If error still occurs, change the USB key or re-format the inter-
nal memory (see Alarm 4).
8 Medium File system mount error
Receiver failed to detect the USB key. Remove USB key and re-insert
it. If still unsuccessful, use a new USB key.
12 Medium GSM connection failed
GSM connection has been lost. Try again.
Most of the time, the server ends the connection for one of the follow-
ing reasons:
- User name and/or password is incorrect (contact your provider)
- Server is faulty (contact provider)
- You are outside the area covered by the NTRIP or Direct IP server.
14 Medium GSM initialization failed
Receiver failed to initialize GSM modem. Check the GSM status icon
on the display screen (should indicate Modem is powered on). If error
persists, contact your GPRS provider for assistance.
16 Medium GSM data write error
Receiver failed to write data on the GSM port. Try again. If error per-
sists, restart the receiver. If error persists, call your local dealer or
email technical support for assistance.
19 Medium GSM power error
Receiver failed to power on the modem or action required from modem
while it is off. If error persists, call your local dealer or email technical
support for assistance.
21 High
USB removed while file
opened User error. USB key should not be removed while data is being logged
to this key. Data file in progress will be entirely lost.
22 High File transfer Error
Receiver failed to transfer data from the internal memory to the USB
key. Change the USB key and try again. If error persists, restart
receiver. If error still persists, call your local dealer or email technical
support for assistance.
23 High Transfer to USB failed
Receiver failed to transfer data from the internal memory to the USB
key because the key is full. Empty the key or insert a new one and then
try again.
24 Low RTC send error
Receiver has detected a task not running properly. Restart receiver. If
error still persists, call your local dealer or email technical support for
assistance
25 Medium Bad radio settings
Bad $PASHS,RDP,PAR command received. Consider the following:
-Settings may be incompatible with the type of radio used
-Settings may have been rejected by the radio
Correct command syntax and/or parameters and re-send command.
# Rank Alarm Label Symptoms & Remedies