Spectra Precision ProMark 800 Reference Manual - Manual (Page 383)

371
Query Command Library
SIT: Site Name
Function This command is used to read the name of the site on which
data is currently being logged.
Command Format Syntax
$PASHQ,SIT[*cc]
Response Format Syntax
$PASHR,SIT,s*cc
Parameters
Example
$PASHQ,SIT
$PASHR,SIT,SITE*1D
Relevant Set
Command
$PASHS,SIT
See also $PASHQ,FLS
SNM: Signal-to-Noise Ratio Mask
Function This command returns the current value assigned to the
signal-to-noise ratio (SNR) mask. Any satellite received with
an SNR value for the C/A code signal less than this mask will
be rejected from the PVT computation.
Command Format Syntax
$PASHQ,SNM[*cc]
Parameters
None.
Response Format Syntax
$PASHR,SNM,d1*cc
Parameter Description Range
s Site name 4 characters max.
*cc Checksum *00-*FF