Spectra Precision ProMark 800 Reference Manual - Manual (Page 200)

188
Set Command Library
Parameters
Comments
The command is NAKed if the [O] option is not installed or
the receiver does not support Galileo.
Example
Enabling Galileo:
$PASHS,GAL,ON*12
Relevant Query
Command
$PASHQ,GAL
$PASHQ,PAR
See also $PASHS,CFG
$PASHS,SBA
$PASHS,GPS
$PASHS,GLO
GLO: GLONASS Tracking
Function This command is used to enable or disable GLONASS
tracking. The command is valid only if the GLONASS option
has been activated in the receiver.
Command Format Syntax
$PASHS,GLO,s1[*cc]
Parameter Description Range Default
s1
Enabling/disabling Galileo tracking:
• On: Track and use Galileo satellites
• Off: Do not track Galileo satellites
ON, OFF OFF
*cc Optional checksum *00-*FF -