Spectra Precision ProMark 800 Reference Manual - Manual (Page 337)

325
Query Command Library
NMO: NMEA Message Output Settings
Function This command is used to query the types of NMEA messages
currently enabled on the specified port.
Command Format Syntax
$PASHQ,NMO,c[*cc]
Parameters
Response Format Syntax
$PASHR,NMO,c1,d2,f3,d4,n(s5,f6)*cc
(n=18)
Parameters
Parameter Description Range
c
Queried port ID:
• A: Serial port
• C: Bluetooth port
• E: Modem
• M, U: Memory
A, C, E, M, U
*cc Optional checksum *00-*FF
Parameter Description Range
c1
Queried port ID:
• A: Serial port
• C: Bluetooth port
• E: Modem
• M, U: Memory
A, C, E, M, U
d2 Baud rate code
0-15 (A, E)
0, 1 (C, M, U)
f3
Output rate as defined by the last
$PASHS,NME,PER command run.
0-999.0
d4
Number of NMEA messages listed in the
response line
28
s5 NMEA message type
ALM, DTM, GGA,
GLL, GMP, GNS,
GRS, GSA, GST,
GSV, HDT, RMC,
VTG, ZDA, ATT,
CRT, DCR, DDS,
DPO, LTN, POS,
RRE, SAT, SGA,
SGL, SGP, USR,
VEC, XDR, PTT