Cts: handshaking – Spectra Precision ProMark 800 Reference Manual User Manual

Page 296

Advertising
background image

284

Query Command Library

Comment

The code allotted to a position solution of the SBAS
differential type is either “1” or “9”, depending on the last
$PASHS,NPT command run.

See also

$PASHS,NME

$PASHS,NPT

CTS: Handshaking

Function

This command allows you to query the handshaking (RTS/
CTS) protocol status for port A. If no port is specified in the
command, the response message is sent back to the port that
issued the query command.

Command Format

Syntax

$PASHQ,CTS[,s1][*cc]

Response Format

Syntax

$PASHR,CTS,s1,s2*cc

Parameters

Example

$PASHQ,CTS
$PASHR,CTS,ON*1D

Relevant Set

Command

$PASHS,CTS

See also

$PASHQ,PRT

$PASHQ,MDP

Parameter

Description

Range

s1

Queried port

A

s2

Current status of RTS/CTS handshaking protocol ON, OFF

*cc

Checksum

*00-*FF

Advertising