Spectra Precision ProMark 800 Reference Manual - Manual (Page 236)

224
Set Command Library
Parameters
Example
Deleting receiver name “MyReceiver”:
$PASHS,RCP,DEL,MyReceiver*74
Relevant Query
Command
$PASHQ,RCP
See Also $PASHS,RCP,GB1
$PASHS,RCP,GB2
RCP,REF: Naming Reference Receiver
Function This command is used to enter the reference receiver name.
Command Format Syntax
$PASHS,RCP,REF,s1[,d2][*cc]
Parameters
Comment
The supported receiver models are listed below (these are
case-sensitive names):
Parameter Description Range
s1
Receiver name you want to delete (case sensi-
tive) 31 characters
max.
*cc Optional checksum *00-*FF
Parameter Description Range Default
s1 Receiver name (case-sensitive).
31 characters
max.
Empty
d2
Receiver name preference:
• 0: s1 is ignored if the incoming refer-
ence data contain the reference
receiver name
• 1: s1 is always used and the decoded
reference receiver name is ignored.
0 or 1 0
*cc Optional checksum *00-*FF