Spectra Precision ProMark 800 Reference Manual - Manual (Page 8)

iv
PEM: Setting the Position Elevation Mask.................................213
POP: Setting Internal Update Rate for Measurements and PVT ...213
POS: Setting the Antenna Position ...........................................214
PPS: Setting PPS Pulse Properties...........................................215
PRT: Setting Baud Rates.........................................................216
PWR,OFF: Powering Off the Receiver .......................................217
PWR,PAR: Power Management ................................................217
QZS: Enabling/Disabling QZSS Tracking ...................................218
RAW: Enabling/Disabling Raw Data Messages
in Legacy Ashtech Format .......................................................219
RAW,ALL: Disabling All Raw Data Messages .............................221
RAW,PER: Setting Unique Output Rate for Raw Data.................221
RCP,GBx: GLONASS Carrier Phase Biases for
User-Defined Receiver ............................................................222
RCP,DEL: Deleting User-Defined Receiver Name .......................223
RCP,REF: Naming Reference Receiver .....................................224
RDP,OFF: Powering Off the Internal Radio ................................225
RDP,ON: Powering On the Internal Radio .................................226
RDP,PAR: Setting the Radio....................................................226
RDP,TYP: Defining the Type of Radio and the Receiver
Port Used ..............................................................................231
REC: Enable/Disable, Start/Stop Raw Data Recording ................232
RNX,TYP: ATOM RNX Differential Message ...............................234
RST: Default Settings .............................................................235
RTC,MSG: Defining a User Message .........................................236
RTC,TYP: RTCM Message Type ................................................237
SBA: Enabling/Disabling SBAS Tracking ...................................239
SIT: Defining a Site Name.......................................................239
SNM: Signal-To-Noise Ratio Mask............................................240
SOM: Masking Signal Observations ..........................................240
SOM,CTT: Cumulative Tracking Time Mask ...............................242
SOM,NAV: Navigation Data Mask .............................................243
SOM,SNR: Signal-to-Noise Ratio Mask .....................................244
SOM,WRN: Channel Warnings Mask.........................................246
STI: Defining a Station ID .......................................................247
SVM: Setting the Maximum Number of Observations in the PVT..248
UDP: User-Defined Dynamic Model Parameters.........................249
UNT: Distance Unit Used on Display Screen ............................249
USE: Enabling or Disabling the Tracking of a GNSS Satellite .....250
USR,POS: Setting Position for User Message Type “GGA” ..........252
USR,TYP: Defining User Message Type.....................................253
USR,TXT: Entering text for User Message Type “TXT” ................253
UTS: Synchronizing Onto GPS Time ........................................254
WAK: Acknowledging Alarms ...................................................255
ZDA: Setting Date & Time .......................................................256
Appendix C. Query Command Library .............................................. 257
AGB: Reading GLONASS Bias Setting ......................................257