Spectra Precision ProMark 800 Reference Manual - Manual (Page 312)

300
Query Command Library
$PASHS,MEM
GAL: GALILEO Tracking Status
Function This command queries the receiver for the current GALILEO
tracking status.
Command Format Syntax
$PASHQ,GAL[*cc]
Response Format Syntax
$PASHR,GAL,s1*cc
Parameters
Example $PASHQ,GAL
$PASHR,GAL,ON*1D
See Also $PASHS,GAL
GGA: GNSS Position Message
Function This command is used to output a GGA message containing
the last computed position. If no position is computed, the
message will be output anyway, but with some blank fields.
Command Format Syntax
$PASHQ,GGA[*cc]
Response Format Syntax
$GPGGA,m1,m2,c3,m4,c5,d6,d7,f8,f9,M,f10,M,f11,d12*cc
Parameter Description Range
s1
Differential decoder number
• ON: GALILEO satellites currently tracked and used
• OFF (default): GALILEO satellites not currently tracked
ON, OFF
*cc Checksum