Spectra Precision ProMark 800 Reference Manual - Manual (Page 298)

286
Query Command Library
DCR: Cartesian Coordinates of Baseline
Function This command allows you to output the DCR message
containing the ECEF components of the baseline for the last
computed position as well as other information on the
position solution.
Command Format Syntax
$PASHQ,DCR[*cc]
Response Format Syntax
$PASHR,DCR,d1,d2,m3,f4,f5,f6,f7,f8,f9,f10,f11,f12,f13,f14,f15,s16*cc
Parameters
Example
$PASHQ,DCR
$PASHR,DCR,3,09,130924.00,-37.683,55.081,17.925,0.109,0.001,
0.002,0.001,0.047,1.9,1.0,1.6,1.1,G010*71
Parameter Description Range
d1
Position mode:
• 0: Autonomous
• 1: RTCM (or SBAS differential)
• 2: RTK float
• 3: RTK fixed
• 9: SBAS Differential. See comment.
0-3, 9
d2 Count of SVs used in position computation 3-27
m3 UTC time (hhmmss.ss)
000000.00-
235959.99
f4 ECEF X component of baseline, in meters ± 99999.999
f5 ECEF Y component of baseline, in meters ±99999.999
f6 ECEF Z component of baseline, in meters ±9999.999
f7 Receiver clock offset, in meters ±300000.000
f8 Velocity vector, X component, in m/s ±9.999
f9 Velocity vector, Y component, in m/s ±9.999
f10 Velocity vector, Z component, in m/s ±9.999
f11 Receiver clock drift, in m/s ±2000.000
f12 PDOP 0.0-99.9
f13 HDOP 0.0-99.9
f14 VDOP 0.0-99.9
f15 TDOP 0.0-99.9
s16 Firmware version ID (GNSS board fw) 4-char string
*cc Checksum *00-*FF