Spectra Precision ProMark 800 Reference Manual - Manual (Page 133)

121
Miscellaneous
• When next turning on the ProMark 800, don’t forget to use
the Power+Log+Scroll button combination. By restoring
the factory settings, this procedure will allow the receiver
to query, and so identify, the new radio module.
Direct IP Connection To Your Own Base Through GPRS Modem
and RTDS Software
Introduction Until recently, Direct IP connections from Spectra Precision
rovers were possible only with third-party reference stations.
Today, with the RTDS
1
software, you can also have your own
base transmitting its corrections to your rovers through a
Direct IP connection.
In this configuration, the RTDS software serves as the
relaying device between the base and the rovers. The
presence of a relaying device is required because modems are
assigned an IP address by the network when they connect to
it, and this IP address cannot be known ahead of time for
both modems. The RTDS software solves this problem by
providing a fixed IP address through which that base and
rover modems can communicate.
1. RTDS for Real Time Data Server
Static IP Address
Two Port Numbers
GPRS/Direct IP
Rovers
Modem
RTDS Software
GPRS/Direct IP
Base
Modem
Internet