Spectra Precision ProMark 800 Reference Manual - Manual (Page 311)

299
Query Command Library
FLS: List of Raw Data Files
Function This command is used to list the raw data files stored in the
selected memory (cf. $PASHS,MEM). An index number is
used in the command fomat to limit the number of listed
files. Files are listed in blocks of 10 files.
Command Format Syntax
$PASHQ,FLS,d[*cc]
Parameters
Response Format Syntax
$PASHR,FLS,d1,d2,d3,n(s4,m5,d6)*cc
Parameters
Example Listing the files from index number “10”:
$PASHQ,FLS,10
$PASHR,FLS,65240,012,02,sit3,146821321,7,sit3,146821321,4*06
See also $PASHS,REC
$PASHS,FIL,D
Parameter Description Range
d
File index number (“0” for 1st file, “1” for 2nd file, etc.).
All files with index number equal to or greater than this
number will be listed. If d is greater than the highest file
index number, the command is “NAKed”.
0-999
*cc Optional checksum *00-*FF
Parameter Description Range
d1
Free memory space, in kbytes, in the selected
memory 000000-
999999
d2
Total number of files currently stored in the
selected memory
000-999
d3
Number of files listed corresponding to those
matching the command criterion
00-10
s4 Site name assigned to the file 4 characters
m5
File time in the “wwwwdhhmm” format where:
• wwww: GPS week number
• d: Day in week
• hh: Time (hours)
• mm: Time (minutes)
0000-9999
1-7
00-23
00-59
d6 File size in kbytes 0-999999
*cc Checksum *00-*FF