Spectra Precision ProMark 800 Reference Manual - Manual (Page 398)

386
Query Command Library
Response Format Syntax
$PASHR,WARN,s1,s2*cc
Parameters
Example $PASHQ,WARN
$PASHR,WARN,connect. to GPRS failed,PENDING*7F
See also $PASHS,WAK
ZDA: Time & Date
Function This command returns the receiver date & time.
Command Format Syntax
$PASHQ,ZDA[*cc]
Response Format Syntax
$GPZDA,ZDA,m1,d2,d3,d4,d5,d6*cc
Parameter Description Range
s1
Warning message label
NONE: No warning message
See List of
Alarms on
page 93.
s2
Status:
• Pending: Alarm acknowledged
• Current: Alarm not acknowledged yet
• Occurred: An error condition was detected
earlier but has vanished since then
PENDING,
CURRENT,
OCCURRED
*cc Checksum *00-*FF