Bth: bluetooth settings, Cfg: gnss tracking configuration – Spectra Precision ProMark 800 Reference Manual User Manual
Page 285
Advertising
273
Query Command Library
BTH: Bluetooth Settings
Function
This command is used to read the current Bluetooth settings.
Command Format
Syntax
$PASHQ,BTH[*cc]
Response Format
Syntax
$PASHR,BTH,s1,s2,s3,s4*cc
Parameters
Example
$PASHQ,BTH
$PASHR,BTH,00:07:80:83:91:86,PM_743109,-1,ON*68
See also
$PASHS,BTH,NAME
$PASHS,BTH,PIN
CFG: GNSS Tracking Configuration
Function
This command queries the receiver for the type of GNSS
tracking currently enabled.
Command Format
Syntax
$PASHQ,CFG[*cc]
Response Format
Syntax
$PASHR,CFG,s1*cc
Parameter
Description
Range
s1
Bluetooth address (xx:xx:xx:xx:xx:xx)
17 characters
s2
Bluetooth name
64 characters max.
s3
Bluetooth PIN code
0 to 12 digits max.
-1: no PIN code
s4
Bluetooth status
ON, OFF
*cc
Checksum
*00-*FF
Advertising