Spectra Precision ProMark 800 Reference Manual - Manual (Page 179)

167
Set Command Library
• To insert an idle wait time of several seconds between any
two $PASH commands, you can insert a specific
command named $PASHS,CMD,WTI between these two
commands. The $PASHS,CMD,WTI command may be
inserted as many times as necessary in the file.
• Naming the command file “autoconfig.cmd” or
“uploadconfig.cmd” on the USB key will allow the
receiver to automatically start the execution of all the
commands stored in the file when you plug the USB key
to the receiver. 6A6EC3667E000The difference between
the two file names is in the need for a user confirmation
before running the file: “autoconfig.cmd” will require user
confirmation, not “uploadconfig.cmd”.
Relevant Query
Command
None.
See also $PASHS,CMD,WTI
CMD,WTI: Inserting Wait Times
Function This command can be inserted one or more times in the list
of $PASH commands run with the CMD,LOD command.
When running this command, in fact the receiver inserts a
wait time of the requested value in the execution of the
$PASH commands.
Command Format Syntax
$PASHS,CMD,WTI,d[*cc]
Parameters
Example
The command line below inserted in a command file will
generate a 10-s wait time when executed:
$PASHS,CMD,WTI,10*74
Parameter Description Range
d
Wait time generated by the command, in sec-
onds.
1-3600
*cc Optional checksum *00-*FF