Spectra Precision ProMark 800 Reference Manual - Manual (Page 303)

291
Query Command Library
Comment
The code allotted to a position solution of the SBAS
differential type is either “1” or “9”, depending on the last
$PASHS,NPT command run.
See also $PASHS,NME
$PASHS,NPT
DRD: Data Recording Duration
Function This command returns the duration that was last set for all
the G-files that the receiver will be recording.
Command Format Syntax
$PASHQ,DRD[*cc]
Parameters
None.
Response Format Syntax
$PASHR,DRD,d1*cc
Parameters
Example $PASHQ,DRD
$PASHR,DRD,60*0C
Relevant Set
Command
$PASHS,DRD
DRI: Raw Data Recording Rate
Function This command queries the current recording rate for all raw
data logged in the internal or external memory.
Parameter Description Range
d1 Duration of data recording held in one G-file, in seconds 15-1440
*cc Checksum *00-*FF