Spectra Precision ProMark 800 Reference Manual - Manual (Page 300)

288
Query Command Library
Example $PASHQ,DDS
$PASHR,DDS,1,140235.33,A,RT3,200,100,0,100,5,50,1.05,1.00,3,1004,1.00
0,0.500,1005,30.000,18.000,1006,30.000,18.000*49
See Also $PASHS,NME
DIP: Direct IP Parameters
Function This command is used to query the parameters used for a
Direct IP connection. When c6 is omitted in the query
command, the returned Direct IP settings are those for the
port defined through the $PASHS,DIP,PAR or $PASHS,DIP
command last run.
Command Format Syntax
$PASHQ,DIP[,c6][*cc]
Response Format Syntax
$PASHR,DIP,RIP,s1,PRT,d2[,LGN,s3,PWD,s4]*cc
f13 Min epoch interval, in seconds 0.00-20.47
d14
Number (n) of different messages
detected since last stream change
0-63
d15 Message type
RT2: 1-63
RT3: 1001-4094
CMR: 0(obs), 1(loc),
2(desc), 3(glo), 12(cmr+)
DBN: 10(RPC), 11(BPS)
TPZ: 0 only
ATM: 0-15
f16 Interval of last message, in seconds 0.000-1023.000
f17 Age of last message, in seconds 0.000-1023.000
*cc Checksum
Parameter Description Range