Charging batteries before use, Screen backlight, Data transfer screen – Spectra Precision ProMark 800 Reference Manual User Manual

Page 27: Removing the battery from the promark 800

Advertising
background image

15

Introduction

Memory

Management

Screen

From the ATL Recording screen, press the Scroll button to
access the Memory Management screen. The flowchart
below summarizes the different tasks you can perform at this
point in the management of the receiver memory.

Screen Backlight

The screen backlight is automatically turned off if no key is
pressed for 1 minute. When the backlight is off, a short press
on the Scroll button will turn it back on. The Scroll button will
then recover its usual functions.

Data Transfer

Screen

For more information on the screen displayed when
downloading files, refer to Downloading Raw Data
on page

31.

Charging Batteries Before Use

Make sure the battery is fully charged for each ProMark 800
you will be using in the field. Follow the instructions below to
charge a battery.

Removing the

Battery from the

ProMark 800

Unless the battery has already been taken out, do the
following:

• Put the ProMark 800 upside down.

Clean up

internal

memory?

Delete

all G-files?

Delete

all files?

Format

memory?

Yes

Yes

Yes

No

No

Yes

No

No

Back to General Status Screen

ATL Recording Screen

Scroll button

Confirm?

Yes

No

In progress...

Advertising