Spectra Precision ProMark 800 Reference Manual - Manual (Page 263)

251
Set Command Library
Parameters
Comments
• Use the command as many times as the number of
satellites you want to disable from tracking.
• The tracking of a given satellite is suspended immediately
after disabling it. The satellite is also excluded from the
list of searched/tracked satellites.
• Conversely, re-enabling a previously disabled satellite
consists of re-inserting it into the list of searched/tracked
satellites.
• Be aware that re-enabling the tracking of a satellite shortly
after having disabled it does not mean that the receiver
will be able to quickly restore the tracking of this satellite.
Examples
Disabling GLONASS satellite PRN 5:
$PASHS,GLO,USE,5,OFF
Disabling all GLONASS satellites:
$PASHS,GLO,USE,,OFF
Enabling all GPS satellites:
$PASHS,GPS,USE,,ON
Parameter Description Range Default
s1
GNSS type:
• GPS: GPS
• GLO: GLONASS
• GAL: GALILEO
• SBA: SBAS
• QZS: QZSS
GPS, GLO,
GAL, SBA,
QZS
-
d2
Satellite PRN:
• For GPS: 1-32
• For GLONASS: 1-24
• For GALILEO: 1-30
• For SBAS: 1-19
• For QZSS: 1-5
d2 omitted in the command line combined
with s3=ON: Re-enables all the satellites
you previously disabled.
1-32 -
s3 Tracking status ON,OFF ON
*cc Optional checksum *00-*FF -