Spectra Precision ProMark 800 Reference Manual - Manual (Page 92)

80
RTK Implementation
Activating a Data Link in NTRIP Mode
In this mode, you will have to:
• Enter the five identification parameters of the caster, i.e.:
1. IP address
2. Mount point
3. Port number
4. Login
5. Password
• The caster will return the source table from which you will
be able to select the base from the caster with which you
would like the rover to work. The nearest base will be
prompted as the default setting.
At this stage, and only if this choice is available from the
selected base, you can specify whether you wish the base
to send its own RTK correction data or instead, RTK
correction data computed from the base network (VRS,
MAC or FKP).
Base
Base
Base
Rover
In
te
rn
et
Base
Base
Base
Caster
Interne
t