Spectra Precision ProMark 800 Reference Manual - Manual (Page 251)

239
Set Command Library
SBA: Enabling/Disabling SBAS Tracking
Function This command is used to enable or disable SBAS tracking.
Command Format Syntax
$PASHS,SBA,s1[*cc]
Parameters
Example
Enabling SBAS tracking:
$PASHS,SBA,ON*08
Relevant Query
Command
$PASHQ,SBA
See also $PASHS,GLO
SIT: Defining a Site Name
Function This command is used to define a site name that will be used
in the naming of the next logged raw data file.
Command Format Syntax
$PASHS,SIT,s[*cc]
Parameters
Example
Defining site name “ECC1”:
Parameter Description Range Default
s1
Enables (ON) or disables (OFF)
SBAS tracking
ON, OFF ON
*cc Optional checksum *00-*FF
Parameter Description Range
s
Site name (or site ID), a 4-character string
where “*”, “.”, “/” and “\” are not allowed.
*cc Optional checksum *00-*FF