Spectra Precision ProMark 800 Reference Manual - Manual (Page 384)

372
Query Command Library
Parameters
Example $PASHQ,SNM
$PASHR,SNM,45*09
Relevant Set
Command
$PASHS,SNM
SOM: Signal Observations Masking
Function This command is used to read the type of mask currently
applied to signal observations.
Command Format Syntax
$PASHQ,SOM[*cc]
Parameters
None.
Response Format Syntax
$PASHR,SOM,d*cc
Parameters
Example
$PASHQ,SOM
$PASHR,SOM,4*3D
Relevant Set
Command
$PASHS,SOM
Parameter Description Range
d1 Signal-to-Noise ratio mask, in dB.Hz 0-60
*cc Checksum *00-*FF
Parameter Description Range
s
Mask type:
• 0: No masking
• 1: Reference station
• 2: Static base
• 3: Moving base
• 4: Rover
• 9: User-defined
0-4, 9
*cc Checksum *00-*FF