Atl: debug data recording – Spectra Precision ProMark 800 Reference Manual User Manual
Page 164
152
Set Command Library
Relevant Query
Command
$PASHQ,ANT
See Also
$PASHS,ANH
$PASHS,ANR
ATL: Debug Data Recording
Function
This command allows you to enable or disable the recording
of debug data. The resulting log file (called “ATL file”) is
saved to the memory selected through the $PASHS,MEM
command. The file is named as follows:.
ATL_yymmdd_hhmmss.log
Normally you don’t have to record debug data. However,
Technical Support may ask you to do so if a problem occurs
in your receiver and Technical Support needs to analyze the
resulting log file to fix the problem. The content of this file
can only be analyzed by Technical Support as it uses a
proprietary, undisclosed data format, which in addition is
subject to change without notice.
Command Format
Syntax
$PASHS,ATL,s1[,d2][,f3][,d4][*cc]