Spectra Precision ProMark 800 Reference Manual - Manual (Page 158)

146
Set Command Library
ANP,DEL: Delete User-Defined Antenna
Function This command allows you to delete the definition of a user-
defined antenna.
Command Format Syntax
$PASHS,ANP,DEL,s1[*cc]
Parameters
Example
Deleting RZ510A antenna definition:
$PASHS,ANP,DEL,RZ510A*1A
Relevant Query
Command
$PASHQ,ANP
See Also $PASHS,ANP,PCO
$PASHS,ANP,ED1
$PASHS,ANP,ED2
ANP,OUT: Defining a Virtual Antenna
Function This command allows you to specify the name of an antenna
that raw data will be adjusted to. By specifying the name of
a virtual antenna, you ask the receiver to correct (“reduce”)
the raw and differential data it generates from the received
GNSS signals to make them available as if they had been
received through that antenna.
Command Format Syntax
$PASHS,ANP,OUT,s1[*cc]
Parameter Description Range
s1 User-defined antenna name (case-sensitive) 31 characters max.
*cc Optional checksum *00-*FF