Rec: raw data recording status, Rid: receiver identification – Spectra Precision ProMark 800 Reference Manual User Manual
Page 367
355
Query Command Library
REC: Raw Data Recording Status
Function
This command allows you to read the current raw data
recording status.
Command Format
Syntax
$PASHQ,REC[*cc]
Response Format
Syntax
$PASHR,REC,c*cc
Parameters
Example
$PASHQ,REC
$PASHR,REC,N*42
Relevant Set
Command
$PASHS,REC
RID: Receiver Identification
Function
This command allows you to read the receiver identification
parameters.
Parameter
Description
Range
c
Control character:
• Y: Yes. Data recording in progress. Receiver will
start recording data automatically when you next
turn it on.
• N: No. No data recording in progress. Receiver
will not start recording data automatically when
you next turn it on.
• S: Stop. No data recording in progress but the
receiver will start recording data automatically
when you next turn it on.
• R: Record. Data recording in progress but the
receiver will not start recording data automati-
cally when you next turn it on.
Y, N, S, R
*cc
Checksum
*00-*FF