Spectra Precision ProMark 800 Reference Manual - Manual (Page 178)

166
Set Command Library
$PASHS,GAL
CMD,LOD: Running a List of $PASH Commands
Function This command is used to run the complete list of $PASH
commands stored in a file found in the USB key currently
connected to the receiver.
This implies that the file (in text editable format) should have
first been saved to that key before connecting the key to the
receiver’s USB port.
Command Format Syntax
$PASHS,CMD,LOD[,s][*cc]
Parameters
Examples
Running the serial commands in autoconfig.cmd:
$PASHS,CMD,LOD*54
Running the serial commands in a file named
“myconfig.cmd”:
$PASHS,CMD,LOD,myconfig.cmd*02
Comments • The file can contain any $PASHS or $PAHSQ commands.
• If the file contains the $PASHS,REC or $PASHS,INI
command, this command will always be run last, whatever
its position in the file.
• All data lines returned by the receiver in response to the
executed commands are written to a log file named as
follows:
<command_file_name>.log
Parameter Description Range Default
s
File name. If s is omitted, it is
assumed that the file to be run
is “autoconfig.cmd”.
255 characters
max.
autoconfig.cmd
*cc Optional checksum *00-*FF