Cts: handshaking, Dbn,typ: dben message type & output rate – Spectra Precision ProMark 800 Reference Manual User Manual

Page 188

Advertising
background image

176

Set Command Library

CTS: Handshaking

Function

This command enables or disables the RTS/CTS handshaking
protocol for the specified port. If no port is specified, the
command applies to the port through which the command is
routed.

Command Format

Syntax

$PASHS,CTS,[c1],s2[*cc]

Parameters

Example

Disabling RTS/CTS on port A:

$PASHS,CTS,A,OFF*3F

Relevant Query

Command

$PASHQ,CTS

See also

$PASHS,PRT

$PASHS,MDP

DBN,TYP: DBEN Message Type & Output Rate

Function

This command is used in a base to define the type of DBEN
message the base should generate (type and rate). Enabling
or disabling the output of the DBEN message is made through
$PASHS,BAS or $PASHS,BDS.

Command Format

Syntax

$PASHS,DBN,TYP,s1,d2[*cc]

Parameter

Description

Range

Default

c1

Port ID

A

s2

RTS/CTS control

ON, OFF

ON

*cc

Optional checksum

*00-*FF

Advertising