Dbn,msi: dben message status – Spectra Precision ProMark 800 Reference Manual User Manual
Page 297
Advertising
285
Query Command Library
DBN,MSI: DBEN Message Status
Function
This command is used in a base receiver to read the current
settings of the DBEN messages the base currently generates
and outputs.
Command Format
Syntax
$PASHQ,DBN,MSI[*cc]
Response Format
Syntax
$PASHR,DBN,MSI,d1,RPC,d2,BPS,d3*cc
Parameters
Example
$PASHQ,DBN,MSI
$PASHR,DBN,MSI,2,RPC,1.0,BPS,30.0*6B
See also
$PASHS,DBN,TYP
$PASHQ,BAS
$PASHQ,CPD,MOD
Parameter
Description
Range
d1
Number of DBEN messages currently output (always 2) 2
RPC,d2
“RPC” message type output rate, in seconds
0-300
BPS,d3
“BPS” message type output rate, in seconds
0-300
*cc
Checksum
*00-*FF
Advertising