Bth,name: bluetooth device name – Spectra Precision ProMark 800 Reference Manual User Manual

Page 174

Advertising
background image

162

Set Command Library

3. In the

Device field, select “ARF7474..” corresponding to

the license-free radio used.

4. Tap on

and complete the license-free radio settings.

5. Still on the

RTK tab and in the same Device field, select

“Internal GSM”.

6. Tap on

and and complete the GSM settings.

7. Tap

to complete the receiver setting.

Activating RTC Bridge

• In FAST Survey, select

Equip>GPS Utilities and then tap on

the

Send Command button.

• In the combo box, type the following command, assuming

port E is the input port and port A the output port:

$PASHS,BRD,ON,0,E,A

• Tap on the

Send button. The RTC Bridge function is

activated once the receiver has executed the command
and the $PASHR,ACK*3D line has been returned to FAST
Survey.

• Tap

twice to close the

GPS Utilities window and return

to the FAST Survey menu.

NOTE: As for the configuration of the rovers supposed to
receive the RTK corrections from this receiver, there is
nothing else to be done apart from configuring the licence-
free radio connected to each of them. Setting this radio can
be done using FAST Survey, from the

RTK tab of the GPS Rover

window (select the appropriate radio model in the

Device

field).

BTH,NAME: Bluetooth Device Name

Function

This command is used to name the Bluetooth device.

Command Format

Syntax

$PASHS,BTH,NAME,s1[*cc]

Advertising