Rockwell Automation 1398-PDM-xxx IQ Master Version 3.2.4 for IA-2000 and IQ-5000 Positioning Drive Modules, IQ-55 - Manual (Page 189)

Operator Terminal • Introduction 167
Publication 1398-PM601A-EN-P — October 2000
TUTORIAL
Operator Terminal
Introduction
An optional Operator Terminal can be used to print messages and values for an operator, and input data
from an operator. (see Fkeys and Xkeys above).
Operator Terminal Instruction Summary
The following is a summary of the commands that are used with the operator terminal. Refer to Part 5
•
Language Reference for more detailed information.
Name Description
CLR [row [, column, length]] Clear the Operator Terminal screen
OTMON = variable Display a monitor variable on the Operator Terminal
PRINT
…
Print a message to the terminal
READ
…
Read input from the terminal