Rockwell Automation 1398-PDM-xxx IQ Master Version 3.2.4 for IA-2000 and IQ-5000 Positioning Drive Modules, IQ-55 - Manual (Page 98)

76 Communications Menu • Version
Publication 1398-PM601A-EN-P — October 2000
MENUS
Communications Menu
The Communications menu provides all the functions to select an axis on a multi-drop serial link, com-
municate using Terminal mode, and set the serial communication parameters for the PC.
To Access Communications Menu Items
• Select the Communications menu by clicking on Communications in the menu bar,
-or-
press ALT to activate the menu bar, then C to pull down the Communications menu.
• Select the menu item by clicking on your selection,
-or-
pressing the letter that is underlined in your selection (for example the ‘P’ in PC),
-or-
using the arrow keys to highlight your selection and then pressing ENTER.