Altera Mentor Verification IP Altera Edition AMBA AXI4-Lite - Manual (Page 183)

VHDL Master BFM
get_address_ready_delay()
Mentor Verification IP AE AXI4-Lite User Guide, V10.3 183
April 2014
get_address_ready_delay()
This nonblocking procedure gets the address_ready_delay field for a transaction that is
uniquely identified by the transaction_id field previously created by either the
create_write_transaction() or procedure.
Example
-- Create a write transaction with start address of 0.
-- Creation returns tr_id to identify the transaction.
create_write_transaction(0, tr_id, bfm_index, axi4_tr_if_0(bfm_index));
....
-- Get the address channel *READY delay of the tr_id transaction.
get_address_ready_delay(address_ready_delay, tr_id, bfm_index,
axi4_tr_if_0(bfm_index));
Prototype get_address_ready_delay
(
address_ready_delay: out integer;
transaction_id : in integer;
bfm_id : in integer;
path_id : in axi4_path_t; --optional
signal tr_if : inout axi4_vhd_if_struct_t
);
Arguments address_ready_delay Address channel A*READY delay measured in ACLK cycles for
this transaction.
transaction_id Transaction identifier. Refer to “ Overloaded Procedure
Common Arguments ” on page 151 for more details.
bfm_id BFM identifier. Refer to “ Overloaded Procedure Common
Arguments ” on page 151 for more details.
path_id (Optional) Parallel process path identifier:
AXI4_PATH_0
AXI4_PATH_1
AXI4_PATH_2
AXI4_PATH_3
AXI4_PATH_4
Refer to “ Overloaded Procedure Common Arguments ” on
page 151 for more details.
tr_if Transaction signal interface. Refer to “ Overloaded Procedure
Common Arguments ” on page 151 for more details.
Returns address_ready_delay