Set_config(), Example, Can set with the – Altera Mentor Verification IP Altera Edition AMBA AXI4-Lite User Manual
Page 44: Function to, Command as the following
Mentor Verification IP AE AXI4-Lite User Guide, V10.3
44
SystemVerilog Master BFM
set_config()
April 2014
set_config()
This function sets the configuration of the master BFM.
Example
set_config(AXI4_CONFIG_MAX_TRANSACTION_TIME_FACTOR, 1000);
Prototype
function void set_config
(
input axi4_config_e config_name,
input axi4_max_bits_t config_val
);
Arguments
config_name
Configuration name:
AXI4_CONFIG_SETUP_TIME
AXI4_CONFIG_HOLD_TIME
AXI4_CONFIG_MAX_TRANSACTION_TIME_FACTOR
AXI4_CONFIG_AXI4LITE_axi4
AXI4_CONFIG_ENABLE_ALL_ASSERTIONS
AXI4_CONFIG_ENABLE_ASSERTION
AXI4_CONFIG_MAX_LATENCY_AWVALID_ASSERTION_
TO_AWREADY
AXI4_CONFIG_MAX_LATENCY_ARVALID_ASSERTION_
TO_ARREADY
AXI4_CONFIG_MAX_LATENCY_RVALID_ASSERTION_
TO_RREADY
AXI4_CONFIG_MAX_LATENCY_BVALID_ASSERTION_
TO_BREADY
AXI4_CONFIG_MAX_LATENCY_WVALID_ASSERTION_
TO_WREADY
AXI4_CONFIG_SLAVE_START_ADDR
AXI4_CONFIG_SLAVE_END_ADDR
” on page 40 for descriptions and valid
values.
Returns
None