M_rd_addr_phase_ready_delay, M_wr_data_phase_ready_delay, Set_wr_resp_valid_delay() – Altera Mentor Verification IP Altera Edition AMBA AXI4-Lite User Manual

Page 343: To co

Advertising
background image

VHDL Tutorials

Verifying a Master DUT

Mentor Verification IP AE AXI4-Lite User Guide, V10.3

343

April 2014

m_rd_addr_phase_ready_delay

The m_rd_addr_phase_ready_delay variable holds the ARREADY signal delay. The delay
value extends the length of the read address phase by a number of ACLK cycles. The starting
point of the delay is determined by the assertion of the ARVALID signal.

Example 11-9

shows the ARREADY signal delayed by two ACLK cycles. You can edit this

variable to change the ARREADY signal delay.

Example 11-9. m_rd_addr_phase_ready_delay

-- Variable : m_rd_addr_phase_ready_delay
signal m_rd_addr_phase_ready_delay : integer := 2;

m_wr_data_phase_ready_delay

The m_wr_data_phase_ready_delay variable holds the WREADY signal delay. The delay
value extends the length of each write data phase (beat) by a number of ACLK cycles. The
starting point of the delay is determined by the assertion of the WVALID signal.

Example 11-10

shows the WREADY signal delayed by two ACLK cycles. You can edit this

function to change the WREADY signal delay.

Example 11-10. m_wr_data_phase_ready_delay

-- Variable : m_wr_data_phase_ready_delay
signal m_wr_data_phase_ready_delay : integer := 2;

set_wr_resp_valid_delay()

The set_wr_resp_valid_delay() procedure has two prototypes (path_id is optional), and
configures the BVALID signal to be delayed by a number of ACLK cycles with the effect of
delaying the start of the write response phase. The delay value of the BVALID signal is stored
in the write_response_valid_delay transaction field.

Example 11-11

shows the BVALID signal delay set to two ACLK cycles. You can edit this

function to change the BVALID signal delay.

Example 11-11. set_wr_resp_valid_delay()

-- Procedure : set_wr_resp_valid_delay
-- This is used to set write response phase valid delay to start driving
-- write response phase after specified delay.
procedure set_wr_resp_valid_delay(id : integer; path_id : in axi4_path_t;
signal tr_if : inout axi4_vhd_if_struct_t) is
begin

set_write_response_valid_delay(2, id, index, path_id, tr_if);

end set_wr_resp_valid_delay;

Advertising