Running the qsys tool, Ter editor. see, Running the qsys – Altera Mentor Verification IP Altera Edition AMBA AXI4-Lite User Manual
Page 356: Tool, The maximum delay between the, Set with the qsys parameter editor. see, Running the, Qsys tool, Rtion_to_awready, The maximum timeout duration from
Mentor Verification IP AE AXI4-Lite User Guide, V10.3
356
Getting Started with Qsys and the BFMs
Setting Up Simulation from the Windows GUI
April 2014
Running the Qsys Tool
1. Open Qsys in the Quartus II software menu.
Start the Quartus II software. When the Quartus II GUI appears, select Tools>Qsys
(refer to
).
Figure 12-3. Select Qsys from the Quartus II Software Top-Level Menu
2. From the Qsys open window, use the File>Open command to open and select the file
ex1_back_to_back_sv.qsys. This Qsys file is in the directory
axi4lite-qsys-examples/ex1_back_to_back_sv (refer to
Select and open the ex1_back_to_back_sv.qsys example.
Figure 12-4. Open the ex1_back_to_back_sv.qsys Example
Note
If you open the Qsys tool in a subsequent session, a Qsys dialog asks you if you want to
open this file.