Canon imageCLASS MF275dw Wireless All-In-One Monochrome Laser Printer - Manual (Page 116)

Reducing Power Consumption (Sleep Mode)
94LS-029
Sleep mode reduces power consumption by pausing certain operations inside the machine.
For Models with the Energy Saver Key ( )
On the operation panel, press [ ] to enter sleep mode. Operation Panel(P. 13)
Also, if no operations are performed for a certain period of time, the machine automatically enters sleep
mode. Configuring Auto Sleep Time(P. 107)
When the machine is in sleep mode, lights yellow-green.
For Models without the Energy Saver Key ( )
You cannot manually put the machine into sleep mode. If no operations are performed for a certain period of
time, the machine automatically enters sleep mode. Configuring Auto Sleep Time(P. 107)
The display turns off in sleep mode.
◼ Exiting Sleep Mode
Perform any of the following operations:
● Press any key on the operation panel.
● Tap the display. (touch panel model)
● When a telephone is connected, take the handset off the hook. (touch panel model)
◼ Configuring Auto Sleep Time
Auto Sleep is a function that automatically places the machine into sleep mode if no operations are performed for a
certain period of time. You can specify the timing of Auto Sleep.
This section describes how to configure the settings using Remote UI from a computer.
On the operation panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the settings.
[Timer/Energy Settings](P. 384)
1
Log in to Remote UI. Starting Remote UI(P. 350)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 352)
3
Click [Timer Settings] [Edit].
➠ The [Edit Timer Settings] screen is displayed.
4
Enter the time in [Auto Sleep Time].
* It is recommended to use the default setting to efficiently save power. [Auto Sleep Time](P. 386)
5
Click [OK].
➠ The settings are applied.
Basic Operations
107